The new TMPM380 microcontroller series with ARM® Cortex™-M3 core-based 32-bit CPU for embedded applications has been design for the European industrial and home appliance market. Toshiba’s original low-power consumption flash memory, NANO FLASH™, is used as on-chip ROM to enable high-performance, low power consumption operation with the Cortex-M3 core.
Developed for embedded applications by ARM Ltd., the core adopted by Toshiba offers exceptional interrupt handling, high code efficiency and low power consumption. Therefore, it can achieve 32-bit performance at cost levels equivalent to a 16-bit core. In addition, development tools for this core are available from many vendors.
Customer Benefits
|
Dedicated features for industrial application and home appliances
- 5V single operation voltage targeting industrial motor solutions and home appliances
- Multi Purpose Timer for 3-phase motor control and IGBT control
- Oscillation Frequency Detector (OFD) supporting IEC 60730 classB by hardware
- Following CMSIS by ARM
- Embedded NANO FLASH™ providing fast response time, fast write and erase time and low power consumption
|
Cortex-M3 Core
- Operation voltage: Peripheral I/O = 4.5V ~ 5.5V
- Max. operation freq.: 40 MHz (quadruple PLL)
- Internal memory:
- Flash: 64kB, 128kB, 256kB high-speed NANO FLASH™
- RAM: 8kB, 12kB, 16kB
- MAC: Executes 32bit x 32bit -> 32bit within 1clk cycle
- Debug circuit: JTAG or SW (Serial Wire; a pair of wires)
- Power saving operation
- Clock gear (for dividing clock to 1/2, 1/4, 1/8 or 1/16)
- Standby mode (IDLE/SLOW/SLEEP/STOP
Built-in functions
- DMA controller: 2 ch
- 12 bit A/D converter: 18 ch (conversion time <2.0 us)
- 16 bit Timer: 8ch (free-running, compare output, PPG output, input capture)
- 16 bit MPT (Multi purpose timer): 3ch
- 3-phase PWM output: 2ch (synch PPG output with AD conversion trigger, encoder input)
- IGBT control timer: 3ch (external trigger start, programmable dead time, synch PPG output and emergency stop signal)
- Serial interface:
- SIO / UART: 5 ch
- I2C / SIO: 2ch
- SSP: 2 ch
- OFD: Oscillation Frequency Detector supporting IEC 60730 class B and 60335
- Power On Reset (POR), Voltage Detector (VLTD),
- Watchdog Timer (WDT), Real Time Clock (RTC)
- Internal Oscillator
- External Interrupt: 16ch
|
|
Product
|
ROM
(kB) |
RAM
(kB) |
Package |
Datasheet |
| TMPM380FYDFG |
256 |
16 |
QFP100 14x20mm 0.65mm
|
Click here |
| TMPM380FYFG |
256 |
16 |
QFP100 14x14mm 0.50mm |
Click here |
| TMPM380FWDFG |
128 |
12 |
QFP100 14x20mm 0.65mm |
Click here |
| TMPM380FWFG |
128 |
12 |
QFP100 14x14mm 0.50mm |
Click here |
| TMPM382FWFG1 |
128 |
12 |
QFP64 14x14mm 0,80mm |
Click here |
| TMPM382FSFG1 |
64 |
8 |
QFP64 14x14mm 0,80mm |
Click here |
1) Under Development
|
To Top