Target Applications

• Actuators (climate, light, mirror, seat)
• Fans (engine, climate, seat…)
• Pumps (steering, fuel, water…)
• Power windows

Toshiba Products

• MCUs with dedicated hardware IP for sine-wave calculation
• ASSPs for various different motors, with integrated driver stage and control logic. No need for software development
• MOSFETs for the power stage

Features

• 3phase full-wave sensorless drive
• Gate driver output for external Pch/Nch MOS driver (3phase-6outputs)
• PWM chopping via both PWM input and DC input
• Built-in Stall mode detection and automatic recovery control
• Built-in 5.12MHz oscillator and 5V reference
• Operation temperature range: Ta=-40 to 125 degree C
• Small surface mount package: SSOP-24pin (pin pitch:0.65mm)
• Built-in two-level overcurrent detector

Package

Features

• 3phase 120deg square wave commutation logic with gate drivers
• Gate driver outputs for external Pch/Nch MOS driver (3phase-6outputs)
• PWM chopping via both PWM input and DC input
• Built-in overcurrent detector: Detect two values (Limited current / Over current)
• Built-in 5.12MHz oscillator and 5V reference
• Operation temperature range: -40 to 125 degree C
• Small surface mount package: SSOP-24pin (pin pitch:0.65mm)

Package

Package

Copper Connector Construction

Features

• Achieves low ON-resistance, low package inductance and high current carrying capability (80A) due to the use of copper (Cu) connectors
• AEC-Q101-qualified at a channel temperature (Tch) of 175°C
• The DPAK+ package is pin-to-pin compatible with conventional DPAK package